Honeywell Vista 20P v10.23, 6160 Keypad (1)Wave2 Siren,(3) 944SP-WH, Jack & Cord

Description

Package Includes:
One (1)
Honeywell Vista 20p, New Version 10.23
One (1) 6160 Custom Alpha Keypad
Three (3) Honeywell 944SP-WH 3/4" hardwired contacts with magnets
One (1) Honeywell Wave2 Siren
One (1) RJ31X Jack and Cord
6% Sales Tax Applies to PA Residence Only
Details-
VISTA® Control Panel
The high capacity, feature-rich VISTA-20P lets you deliver more value to your customers on each and every sale with up to48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an Alarm Net® Internet or 4G communicator can be installed in premises without TELCO lines. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.
Features
IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
Supports four graphic touchscreen keypads
Wireless keys can be programmed without using zones
Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
– 40 hardwire expansion zones
– 40 wireless expansion zones
Two low current on-board trigger outputs
100 Event Log viewable at system keypads with time/date stamp
48 system user codes assignable to either partition
Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
Two independent partitions plus a common partition
– Global Arming from any system keypad
– Go to function to view or operate one partition from the other
– Separate partition account numbers
16 output devices
– Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
Supports four-wire and up to 16 two-wire smokes
– Works with Sentrol CleanMe™ maintenance signal
Multiple actions on output devices depending on system state
– Turns lights off when system arms
– Turns the same light on when system disarms
– Flashes same lights when system is in alarm
Built-in phone line cut monitor with programmable delay and annunciation options
– Display on system keypads
– Trigger local sounders
– Trigger system bell
Security Dealer Features
Automatic System Load Shed
– During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
Dynamic Signaling
– Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio
Valuable End-User Features
Viewable on system keypads:
– Exit countdown
– Time and date display*
– Event log*
Auto keypad backlighting on entry
Keyswitch arming
Programmable macro buttons and single-button arming
Supports a variety of wireless remote controls for single-button operation
User Scheduling
– Latchkey reports to pagers
– Auto arm/disarm
– “User access” time windows
VIP Module allows system control from any touchtone phone
Chime by zone
*Requires custom alpha keypad
Description
The Honeywell 6160 Alphanumeric Keypad is ideal for full functionality when programming or controlling a Honeywell hard-wired security system. The 6160 has an easy to read (32) character display screen which features easy to read plain English status messages. Both the screen and the keys are backlit to provide greater visibility and ease of use. Four oversized function keys can be found on the left of the 6160 keypad which provide programmable functions for burglary, fire, or medical emergency situations, or any other system programmable features that is desired. The Honeywell 6160 is the ideal keypad for use with the Honeywell VISTA Series because system messages and zones are displayed in full English, so the user does not have to interpret LED lights, zone numbers, or other limited data messages. The 6160 also has a speaker which provides audible feedback in the form of beeps to indicate system status, entry/exit delay, or alarm situations.
If you would like to add wireless features to your Honeywell VISTA Series security system, consider the RF keypad. The 6160RF has all of the same functions and features of the 6160, with the added benefit of an integrated unlimited zone wireless receiver. The 6160 is also ideal as a programming keypad for any Honeywell hardwired security system. The alpha-numeric display provides a user doing advanced programming functions with the full range of feedback needed to program in sub-menus such as field *56 zone programming.
The 6160 keypad connects to a Honeywell VISTA Series security system with a four wire data bus connection, and must be addressed to match an available keypad address in the control panel. Keypad programming mode must be entered within the first (60) seconds of powering up the keypad by pressing and holding the [1] and [3] keys. Once in programming mode, set the keypad back to (00) prior to entering a new address in the range of 00-30. With Honeywell VISTA Series control panels, keypads, including the 6160 will use addresses 16-23.
The Honeywell 6160 keypad is the ideal full function premier programming keypad for use with Honeywell wired security systems. Custom zone descriptors make for easy use, and the full alphanumeric screen allows for all programming and system functions.
Description 944 SP-WH
The Honeywell 944SP is a 3/8” diameter recessed contact that you can connect to a wired alarm panel to protect any door or window. Unlike the recessed contacts which uses terminal screws to connect to the contact loop wire, the 944SP has wire leads which you must splice to your contact loop wire. Each 944SP recessed contact includes wire crimps to help with your wiring connections.
The 944SP door and window recessed contact uses an internal reed switch with a rating of 100mA at 28VDC. The internal reed switch is a Form A, SPST, normally closed contact that can be connected to any wired zone setup for a normally closed device.
Recessed door and window contacts require a more complicated installation than surface mount contacts. However, once installed, recessed contacts are much more aesthetically pleasing as you cannot see them when the door or window is closed. To install your Honeywell 944SP contact, you will need to drill a hole in your door or window and a corresponding hole in your door or window frame. The contact hole should be 3/4” diameter and the magnet hole should be 3/8” diameter. The 944SP recessed contact has a 5’ zip cord coming out of the backside with (2) wire leads. Once you have run your wire from your alarm control panel to the door or window to be protected, simply splice the wire connections and press the 944SP contact into the hole until the cap is flush with your door or window. Next, press the magnet into the magnet hole. Now, when you close your door or window, the contact should be directly across from the magnet. Ensure that the gap between the contact and the magnet does not exceed 3/4” otherwise you will not be able to get the contact loop to close and you will have a faulted zone.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application